树枝状银微纳结构的表面增强拉曼散射效应研究

利用两电极电化学沉积法制备出一种树枝状银微纳结构基体.扫描电子显微镜(SEM)的表征结果证实所制备的银基体呈现出完整的树枝状结构,具有对称性的树枝和树干,且树叶清晰可见.实验结果表明,树枝状银微纳结构的表面增强拉曼散射(Surface-enhanced Raman scattering,SERS)可以检测到超低浓度的罗丹明6G(Rhodamine 6G,R6G,10-10 mol/L)光谱信号,即树枝状银微纳结构作为SERS基体表现出较好的灵敏性;当R6G的浓度在10-5~10-10 mol/L范围依次降低一个数量级时,谱带610 cm-1处的拉曼散射强度的相对标准偏差分别为12.1%,12.0%,11.7%,10.9%,13.2%和14.3%,表明所制备银基体的SERS"热点"(Hot spots)分布较均一,树枝状银微纳结构作为SERS基体具有较好的重现性;当低SERS活性的3-巯基丙酸(3-Mercaptopropionic acid,3MPA)的检测浓度为10-5 mol/L时,利用树枝状银基体能检测到3MPA的SERS光谱,说明所制备的银基体对低活性物质也具有较好的SERS灵敏性.     

周期表中一些元素的英文名称解读

在化学专业英语的学习过程中,学生最早接触的是元素周期表。本文对一些元素的英文名称采用解读式的教学方法,通过将元素的英文名称同著名科学家、特定地理名称、太阳系中的星球以及神话中的人物相关联,使元素的英文名称不再枯燥乏味,而变得生动形象,这一过程可以使学生更好地体验学习的乐趣。     

Syntheses,crystal structures and photophysical properties of d10 transition-metal (Ag+, Cu+, Cd2+ and Zn2+) coordination complexes based on a thiophene-containing heterocyclic thioamide

Four d¹⁰ transition-metal coordination complexes 1–4 (1: [Ag₂(TPT)₂(TPTH)₂]; 2: [Cu₆(TPT)₆]·2DMF; 3: [Cd(TPT)₂(TPTH)]·CH₃CH₂OH, 4: [Zn(TPT)₂]_n) have been constructed from a newly designed heterocyclic thioamide ligand, TPTH (TPTH = 4-(thiophen-2-yl)-pyrimidine-2-thiol). All complexes have been structurally elucidated by single crystal X-ray diffraction analyses. Except for 4, which shows a one-dimensional (1-D) chain structure, 1–3 are all discrete coordination complexes featuring dinuclear, hexanuclear and mononuclear entities, respectively. Their photophysical properties have been evaluated in the solid state at room temperature by UV–vis diffuse reflectance and luminescence spectra. Among them, 2 exhibits a strong red luminescence (λ_em = 699 nm) with a remarkable red-shift of the maximum emission compared to that of the TPTH ligand (λ_em = 536 nm). The red emission observed with 2 is ascribed to a LMCT (ligand-to-metal charge transfer) transition which agrees with the DFT calculations.     

Multi‐shelled Hollow Metal–Organic Frameworks

Hollow metal–organic frameworks (MOFs) are promising materials with sophisticated structures, such as multiple shells, that cannot only enhance the properties of MOFs but also endow them with new functions. Herein, we show a rational strategy to fabricate multi‐shelled hollow chromium (III) terephthalate MOFs (MIL‐101) with single‐crystalline shells through step‐by‐step crystal growth and subsequent etching processes. This strategy relies on the creation of inhomogeneous MOF crystals in which the outer layer is chemically more robust than the inner layer and can be selectively etched by acetic acid. The regulation of MOF nucleation and crystallization allows the tailoring of the cavity size and shell thickness of each layer. The resultant multi‐shelled hollow MIL‐101 crystals show significantly enhanced catalytic activity during styrene oxidation. The insight gained from this systematic study will aid in the rational design and synthesis of other multi‐shelled hollow structures and the further expansion of their applications.     

Magneto‐Adaptive Surfactants Showing Anti‐Curie Behavior and Tunable Surface Tension as Porogens for Mesoporous Particles with 12‐Fold Symmetry

Gaining external control over self‐organization is of vital importance for future smart materials. Surfactants are extremely valuable for the synthesis of diverse nanomaterials. Their self‐assembly is dictated by microphase separation, the hydrophobic effect, and head‐group repulsion. It is desirable to supplement surfactants with an added mode of long‐range and directional interaction. Magnetic forces are ideal, as they are not shielded in water. We report on surfactants with heads containing tightly bound transition‐metal centers. The magnetic moment of the head was varied systematically while keeping shape and charge constant. Changes in the magnetic moment of the head led to notable differences in surface tension, aggregate size, and contact angle, which could also be altered by an external magnetic field. The most astonishing result was that the use of magnetic surfactants as structure‐directing agents enabled the formation of porous solids with 12‐fold rotational symmetry.     

3D Laser Micro‐ and Nanoprinting: Challenges for Chemistry

3D printing is a powerful emerging technology for the tailored fabrication of advanced functional materials. This Review summarizes the state‐of‐the art with regard to 3D laser micro‐ and nanoprinting and explores the chemical challenges limiting its full exploitation: from the development of advanced functional materials for applications in cell biology and electronics to the chemical barriers that need to be overcome to enable fast writing velocities with resolution below the diffraction limit. We further explore chemical means to enable direct laser writing of multiple materials in one resist by highly wavelength selective (λ‐orthogonal) photochemical processes. Finally, chemical processes to construct adaptive 3D written structures that are able to respond to external stimuli, such as light, heat, pH value, or specific molecules, are highlighted, and advanced concepts for degradable scaffolds are explored.     

Controlled Synthesis of Hollow PbS‐TiO2 Hybrid Structures through an Ion Adsorption–Heating Process and their Photocatalytic Activity

Hollow hybrid nanostructures have received significant attention because of their unique structural features. This study reports a facile ion adsorption–heating method to fabricate hollow PbS‐TiO₂ hybrid particles. In this method, the TiO₂ spheres used as a substrate material to grow PbS are aggregates of many small amorphous TiO₂ particles, and each small particle is covered with thioglycolic acid ligands through Ti⁴⁺–carboxyl coordination. When Pb²⁺ ions are added to a colloidal solution of these TiO₂ spheres, these ions are adsorbed by sulfhydryl (‐SH) groups to form metal thiolates, and the C−S bond is dissociated by heating to release S²⁻. The S²⁻ ions react with Pb²⁺ ions to form PbS without additive sulfur sources. Additionally, the amorphous TiO₂ spheres are transformed into the anatase phase during the heating process. As a result, the crystallization of TiO₂ spheres along with the formation of PbS is simultaneously carried out by heating. During the heating process, owing to the Kirkendall effect of S²⁻ diffusion and the Ostwald ripening effect of the crystallization of amorphous TiO₂ spheres, PbS‐TiO₂ hollow hybrid structures can be obtained. The XRD and XPS characterizations proved the formation of anatase TiO₂ and PbS. The TEM characterization confirmed the formation of hollow structures in the PbS‐TiO₂ hybrid sample. The photocatalytic activity of the hollow PbS‐TiO₂ hybrid spheres have been investigated for the degradation of Cr⁶⁺ under visible light. The results show that hollow PbS‐TiO₂ hybrid spheres exhibited the highest photocatalytic activity, in which almost all the Cr⁶⁺ was degraded after 140 min.     

Nitrogen‐Doped Mesoporous Carbon‐Encapsulated MoO2 Nanobelts as a High‐Capacity and Stable Host for Lithium‐Ion Storage

N‐doped mesoporous carbon‐capped MoO₂ nanobelts (designated as MoO₂@NC) were synthesized and applied to lithium‐ion storage. Owing to the stable core–shell structural framework and conductive mesoporous carbon matrix, the as‐prepared MoO₂@NC shows a high specific capacity of around 700 mA h g⁻¹ at a current of 0.5 A g⁻¹, excellent cycling stability up to 100 cycles, and superior rate performance. The N‐doped mesoporous carbon can greatly improve the conductivity and provide uninhibited conducting pathways for fast charge transfer and transport. Moreover, the core–shell structure improved the structural integrity, leading to a high stability during the cycling process. All of these merits make the MoO₂@NC to be a suitable and promising material for lithium ion battery.     

Malliavin calculus for regularity structures: The case of gPAM

Malliavin calculus is implemented in the context of Hairer (2014) [16]. This involves some constructions of independent interest, notably an extension of the structure which accommodates a robust, and purely deterministic, translation operator, in $L^2$-directions, between “models”. In the concrete context of the generalized parabolic Anderson model in 2D – one of the singular SPDEs discussed in the afore-mentioned article – we establish existence of a density at positive times.